THRILL Multi-FX LED

THRILL Multi-FX LED is a 3-in-1 LED light fixture that is guaranteed to make your show larger than life. Equipped with laser, strobe, and rotating colored wash light effects with sharp optics and super bright output, THRILL Multi-FX LED has an impressive number of tricks up its sleeve for a wide variety of dazzling looks.

Designed to boost the wow factor and energize crowds with high-speed, eye-catching mid-air looks and ultra-sharp laser effects, THRILL Multi-FX LED is ideal for creating dramatic atmospheres at a variety of entertainment and club environments, including DJ and band performances, wedding parties, and corporate shows.

  • Portable, lightweight, and easy to control
  • Energizing multi-effect light featuring wash light effects, laser, strobe
  • Projects hundreds of razor-sharp laser beams

Features

  • Razor-sharp 50-mW green and 100-mW red laser
  • Vibrant 5 x 3 W RGBWA rotating wash light effects
  • Blinding 8 x 1 W white LEDs for strobe effects
  • Easy to operate standalone sound-activated, master/slave control methods
  • 8 professionally pre-programmed shows
  • DMX operable for individualized control and design
  • Included adjustable bracket for hanging or surface mount
  • Common IEC mains inlet/thru – mains cable included

References

Tech specs

Physical Length: 249 mm (9.8 in.) Width: 229 mm (9.0 in.) Height: 249 mm (9.8 in.) Height with hanging bracket: 288 mm (11.3 in.) Weight: 4.0 kg (8.9 lbs.)
Dynamic Effects Wash effects Color mixing: RGBWA Color selection: 36 color presets Electronic dimming: 0-100% Strobe and pulse effects: Variable speed and action, random strobe Electronic 'shutter' effect: Instant open and blackout Strobe effects Color: White Strobe rate: TBA Special effects: On/off, strobe effect, pulse effects, random and blackout Laser effects Color: Red, green Strobe rate: TBA Special effects: On/off, strobe effect, pulse effects, random and blackout
Control and Programming Control options: DMX, stand-alone Safety switch, laser: Keyed switch on/off operation DMX channels: 2/16 Stand-alone trigger options: Sound-trigger, auto-run User interface: Control panel with LED display DMX compliance: ANSI E1.11 - USITT DMX512-A
Optics Wash and strobe Wash light source: 5 x 3 W RGBWA LEDs Strobe light source: 8 x 1 W White LEDs Minimum LED lifetime: 30 000 hours (to >70% luminous output)* Laser Green laser, power / wavelength: 50 mW / 532 nm Red laser, power / wavelength: 150 mW / 650 nm Aperture diameter: 7 mm Beam shape: Divergent Pulse duration (frequency): Not pulsed Maximum laser power of each beam from aperture: 7.5 mW Class: 3B (US: Class IIIB) Minimum laser lifetime: 3 000 hours* *Figure obtained under manufacturer's test conditions
Construction Housing: Steel Color: Black Protection rating: IP20
Installation Mounting: Adjustable bracket, surface or truss mount Mounting points: Bracket for single rigging clamp, M12 or ½” Orientation: Any (respecting laser precautions) Location: Indoor, dry locations only, overhead use only Minimum distance above floor level: 3 m (9.8 ft.) Minimum distance from public: 3 m (9.8 ft.)
Connections AC power in/thru: IEC male inlet/female connector, C14/C13 DMX data in/thru: 3-pin XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Fuse: F 3 AL, 250 V Maximum number of fixtures on AC power throughput, 100-130 V: 6 x THRILL Multi-FX LED or 3 A Maximum number of fixtures on AC power throughput, 220-240 V: 10 x THRILL Multi-FX LED or 3 A Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current 110 V, 60 Hz: 0.5 A, 62 W * 230 V, 50 Hz: 0.3 A, 66 W * *Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal Cooling: Passive Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%) at full intensity, full white: 225 BTU/hr.
Approvals EU safety: EN 60598-1, EN 60598-2-17, EN 60825-1, EN 62031, EN 6247-1, EN 6247-2-13, EN 62493, IEC TR 62471-2 EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547 FDA (pending)
Included Items Power cable, EU, IEC C13 female, molded Schuko, 1.5 m (4.9 ft.) Power cable, US, IEC C13 female, molded NEMA 5-15P, 1.5 m (4.9 ft.) Mounting bracket Set of keys for laser safety switch
Accessories Super lightweight half-coupler rigging clamp, black: P/N 91602018 Safety cable, SWL 60 kg (132 lb.), BGV C1/ DGUV 17, black: P/N 91604006
Related Items Martin™ M-Touch: P/N 90737040 Martin™ M-Play: P/N 90737030
Ordering Information THRILL™ Multi-FX LED: P/N 90280117

Solutions