Exterior Projection 1000

The Exterior™ Projection 1000 is an unparalleled, powerful tool for permanent outdoor installations to integrate textures, patterns and graphics for limitless creative exterior lighting designs.


Sporting high impact and low maintenance, this advanced, IP66-rated LED projector offers sharp image quality, dynamic features and great reach over huge distances.


  • Flat-field, high-contrast image projection with wide zoom range
  • Fully weatherized with low maintenance and running costs                                                      
  • Full CMY color mixing for maximum creativity


  • Flat field, high contrast image projection based on high power LED engine
  • 0-100% electronic dimming
  • Full CMY color mixing + additional color wheel with 7 interchangeable colors
  • 7 gobo slots for projecting graphic images (gobos included)
  • Animation system for creating animated lighting effects (horizontal and vertical)
  • Zoom range from 10° - 43° for exact projection on desired surface
  • Variable frost for creating morphing effects and hybrid function as wash light
  • 2 rotating prisms for creating abstract multi patterns
  • Intuitive setup, configuration and stand-alone programming via graphical OLED display
  • RDM and DMX control
  • Fully weatherized IP66 fixture for permanent outdoor installation
  • Fully convection cooling using heat pipes technology


Tech specs

Physical Length: 702 mm (27.7 in.) Width: 417 mm (16.5 in.) Height: 618 mm (24.4 in.) Weight: 50 kg (110 lbs.) All figures include mounting yoke
Dynamic Effects Color mixing: CMY, independently variable 0 - 100% Color wheel: 7 interchangeable colors + open Gobo wheel: 7 rotating gobos plus open, indexing, variable rotation Gobo animation wheel: Indexing, continuous rotation with variable angle, speed and direction Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing Frost (wash effect): Motorized, variable Zoom: 10° - 43° (cut-off angles) Focus: Motorized, variable 3 m (9.8 ft.) to infinity Shutter: Electronic, strobe and pulse effects, instant open and blackout Dimming: Electronic, constantly variable 0-100%, 16-bit control
Control and Programming Control options: DMX, RDM, standalone DMX channels: 20 Configuration, addressing and status: Onboard control panel with OLED display or via RDM 8-bit control: CMY, color selection, gobo selection, prism, frost, animation, intensity 16-bit control: Gobo indexing and rotation, zoom and focus DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20
Optics Light source: 440 W white light LED engine CRI (Color Rendering Index): 72 Color temperature: 6500 K LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions
Photometric Data Cut-off angle: 10° - 43° Luminous intensity At 10° zoom: 11 500 lumens At 16° zoom: 15000 lumens At 40° zoom: 16 800 lumens
Construction Housing: Cast aluminum Finish: Hard anodized, white or metallic grey lacquered Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass Ingress protection: IP66 Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Impact resistance: IK08 (with control panel display cover plate installed) EPA (Effective Projected Area): 0.28m² RoHS compliant
Gobos Suitable material: Metal or borosilicate glass, coatings heat-resistant to 450°C (842° F) Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.) Maximum image diameter: 26 mm (1.02 in.) Gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.) Gobo thickness, maximum: 2.0 mm ±0.3 mm (0.079 in. ± 0.012 in.)
Installation Orientation: Any (sides must be kept vertical) Mounting: Adjustable yoke Minimum distance to illuminated surfaces: 0.5 m (20 in.) Location: Suitable for wet locations. Do not immerse in water.
Connections Power cable entry: IP66 cable gland Power connection: 1.8 m (5.9 ft.) cable tail with bare ends Data cable entry: IP66 cable gland Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends
Electrical AC power: 100-120/200-277 V nominal, 50/60 Hz Power supply: Auto-ranging electronic switch-mode Typical half-cycle RMS inrush current: TBA Idle power (zero intensity, no effects applied): TBA
Typical Power and Current 120 V, 60 Hz: 650 W, 6 A, PF 0.9 230 V, 50 Hz: 650 W, 3 A, PF 0.9 277 V, 60 Hz: TBA Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal Cooling: Convection, internal forced air Maximum ambient temperature (Ta max.): 45° C (113° F) * Minimum ambient temperature (Ta min.): -30° C (-22° F)** *Above this temperature, the fixture regulates output to protect from overheating. **Power must remain applied at ambient temperatures below 0° C (32° F).
Approvals EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547 US safety (pending): ANSI/UL 1598 US EMC: CFR 47 Part 15 Class A Canadian safety (pending): CSA C22.2 No 250.0 Australia/NZ (pending): RCM
Accessories Glare Shield, Exterior Projection 1000: P/N 91611768 Projection Setup Gobo, Exterior Projection 1000: P/N 91616075
Related Items Martin™ RDM 5.5 Splitter: P/N 90758150
Ordering Information EU models Exterior Projection 1000, EU, Aluminum: P/N 90512000 Exterior Projection 1000, EU, White: P/N 90512015 US models Exterior Projection 1000, US, Aluminum: P/N 90512005 Exterior Projection 1000, US, White: P/N 90512010